MicroAdvances, Inc. | 6073 N.W. 167 St., Bldg. C-21 | Miami, FL 33015 | Tel: 305-556-4801, Toll Free: 877-62MICRO, Fax: 877-60MICRO
General Purpose Acetal Homopolymer
PHYSICAL ASTM# UNITS VALUE Specific Gravity, solid D-792 --- 1.42 Melt Flow Index D-1238 g/10 min, 22 Water Absorption , 24 hours, 73°C D-570 % 0.2 Mold Shrinkage (Flow/Transverse Direction) --- % 1.8-2.2 MECHANICAL Tensile Strength, yield, 0.125" D-638 PSI (MPa) 9,900 (68) Tensile Elongation, break, 0.125" D-638 % 45 Flexural Strength, 0.125" D-790 PSI (MPa) 14,900 (103) Flexural Modulus, 0.125" D-790 105 PSI (MPa) 4.4 (3,030) Rockwell Hardness D-785 R-Scale 120 Taber Abrasion D-1044 mg/1000 times 13 Izod Impact Str. Notched, 0.125" D-256 ft.-lb./in. (J/m) 13 (68) THERMAL
- Heat Deflection
at 66 PSI
at 264 PSID-648 °F (°C)
- 342 (172)
- 277 (136)
- Linear Coefficient of
- Expansion
D-696 x10-5 cm/cm/°C 10
- FLAME CLASS*
Flammability UL94 --- HB
* This rating is not intended to reflect hazards presented by this or any other material under actual fire condition.
Important: The information and statements contained herein are not to be taken as a warranty or representation for which MicroAdvances assume legal responsibility. The information is offered solely for your consideration, investigation and verification. Users should perform their own testing and verification to determine the applicability and suitability of the information and any products for their own particular purpose.
|
MicroAdvances, Inc. | 6073 N.W. 167 St., Bldg. C-21 | Miami, FL 33015 | Tel: 305-556-4801, Toll Free: 877-62MICRO, Fax: 877-60MICRO |